Resources

Industrial
Automation Blog

Powerful Cylinders for High-Force Applications


Powerful Cylinders for High-Force Applications

When it comes to shearing, punching or broaching applications, you’ll need a lot of force to do the job — especially if it involves metal workpieces. But obtaining that muscle adds a lot of headaches to what should be a simple setup. For example, high-pressure hydraulics can give you the force you need, but they can make a mess and add expensive equipment to your system. And, pneumatic cylinders come with the challenge of obtaining enough compressed air to do the job.

Thankfully, there’s a clean option that can deliver the high force you need while still economizing on space and air requirements. Fabco Multi-Power® cylinders provide tremendous thrust using a small amount of compressed air. In fact, just 100 psi of shop air can produce 22 pounds of force. No high-pressure hydraulics and no bulky, large-bore cylinders are needed.

The Multi-Power Principle

The Multi-Power cylinder design incorporates multiple pistons attached to a single rod that has integral air channels integrated through the shaft. Multiple pistons create a larger collective surface area for the shop air pressure to act on, while pistons are pressurized simultaneously. The result: extraordinary thrust forces at the cylinder rod. That means you get maximum power from the smallest footprint possible. Multi-Power cylinders use only one piston to retract, so you can achieve 22 to 37 percent air volume savings. And, mounting savings can range from 44 to 75 percent. Additional features and benefits of Multi-Power cylinders include:

  • A wide range of bore sizes
  • A composite rod bearing for long life
  • Chrome-plated stainless steel piston rods
  • Prelubrication with Magnalube-G® Teflon grease
  • Available in two, three and four stages with many mounting options (including NFPA).

If a standard product doesn’t suit your needs, we can tailor-make a cylinder with a Multi-Power design. You can also choose a Multi-Power version of these popular Fabco-Air actuators:

  • Pancake®
  • Pancake® II
  • Longstroke™
  • Square I®
  • Air presses

High Force Output With No Hassle

There are times when an application requires greater output forces than can be obtained from conventional cylinders even though space is at a premium. With Fabco Air’s Multi-Power line of cylinders, you can avoid the hassles and costs involved with conventional actuators and high-pressure hydraulic systems.

For more information about Fabco Air’s Multi-Power line of high-force actuators, visit the product page.